Factory Supplier High Efficiency Low Dose Aluminium Granule Smelting Flux

Description:SATA GRANULATED FUSED REFINING FLUXES remove non-metallic inclusions(oxides,carbides and borides) and alkali metals (Sodium,Calcium,and lithium) and hydrogen fromliquid aluminium and its alloys.as well as with furnace and tools cleaning functions.Compared withpowder fluxes, it is with excellent performance on dust fr

Featured Products

Description:
Factory Supplier High Efficient Low Dosage Aluminium Granulated Fused Refining Flux

SATA GRANULATED FUSED REFINING FLUXES remove non-metallic inclusions
(oxides,carbides and borides) and alkali metals (Sodium,Calcium,and lithium) and hydrogen from
liquid aluminium and its alloys.as well as with furnace and tools cleaning functions.Compared with
powder fluxes, it is with excellent performance on dust free and less emission.

Advantage:
Low melting point for rapid dispersion (<480°C)
Improve physical and mechanical properties of casting
Provides high efficiency with low addition and save cost
Produces dry powder dross, hence reducing metal loss to minimum.
Keep furnace,launders,in-line degassers and casting nozzles free from sludge and dross
bulidup
No fluorides emission; hydrogen-chloride (HCl) and particulate stack emissions are typically
below U.S. Environmental Protection Agency emission standards for hazardous air pollutants.

Flux Type:
Flux TypeAl&Al-Alloy TypeFeaturesBenefits
SATA-GF-M111xx/3xx/8xx Series Alloy
Sodium Free
1. Remove alkali metals (Na,Ca,Li)
2. Remove non-metallic inclusions
3. Degassing when injection
4. Generate dry dross
5. Reduce aluminium loss
6. Environmental protective
7. Non hazardous compounds
8. Low application rate
9. Low melting point
10. Good and quick dispersal with fine granules
SATA-GF-M121xxx/5xxx/6xxxSeries Alloy
SATA-GF-M131xxx/5xxx/6xxxSeries Alloy
SATA-GF-M14
( Promag NI)
1xxx/3xxx/5xxx/8xxxWith Sodium
SATA-GF-M15
( Promag SI)

All Al-alloys
(including high
magnesium content)

Sodium Free
SATA-GF-M16
( Promag RI)
Method of AdditionAddition and stirring of fused fluxes by means of injection equipment (SATA-IE) guarantees the highest refining efficiency. Enhance the degassing functions.

Application rate
Recommendation : 0.5-1.0kg /MT of Aluminium melt
Exact application rates depend on the initial and targeted levels of inclusions, hydrogen, sodium, lithium and calcium.

Remarks
MgO insoluble : 0.5% Maximium
Moisture (H2O): 1% Maximium
Melting Point ºC( +1ºC): below 480ºC

STORAGE:
Shelf life of 12 months if stored in normal temperature and closed shaded dry area in undamaged original packing.
Should be used immediately after openning the bags. Seal the remaining flux.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours